This vibration issue worsened and we could not safely accelerate the vehicle when shifting from an idle position into 1st gear - due to extreme vibrations, which became more frequent. Press it again to skip to the beginning of the previous file. The following pages give instructions on how to check proper seat belt fit, what kind of booster seat to use if one is needed, and. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. The shuttering stopped after the car was in higher gears. Add coolant if it is low. Keep the ends of the jumper cables away from each other and any metal on the vehicle until everything is disconnected.
Use the fresh-air ventilation when possible. Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required. Remove frost, snow, or ice. Never tow your vehicle with just a rope or chain. The night position reduces glare from headlights behind you. In the category mode, only the channels within that category are scanned. Use D when towing a trailer in hilly terrain, or to provide engine braking when going down a steep hill.
On vehicles with 6-speed manual transmission, the lockout system prevents you from shifting directly from any forward gear to reverse while the vehicle is moving at a. Pull the bulb straight out of its socket. To get the best protection from the side airbags, front seat occupants should wear their seat belts and sit upright and well back in their seats. . Your seat belt system also includes an indicator on the instrument panel and a beeper to remind you and your passengers to fasten your seat belts. Instruments and Controls indicators, gauges, dashboard, and steering column. Insert the socket back into the light assembly.
Check the inflation pressure of the compact spare tire every time you check the other tires. It shows you how to use seat belts. They warn you of potential hazards that could cause serious injury or death. To signal a lane change, push lightly on the lever, and hold it. These let you control basic functions without removing your hand from the wheel. They will not work to start the engine if the circuits are damaged.
Get your regular tire repaired or replaced, and put it back on your vehicle as soon as you can. This system uses the same sensors as the front airbags to monitor whether the front seat belts are. The inside mirror has day and night positions. Release the switch when you want the window to stop. Emissions Control Systems Defects Warranty and Emissions these two Performance Warranty. Seat Belt Reminder Indicator This indicator reminds you and your passengers to fasten your seat belts.
Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and. Remove the old battery from the back of the inner cover, and note the polarity. Before purchasing a conventional child seat, or using a previously purchased one, we recommend that. If you feel the sound is too loud, choose low. Fuel Gearshift Lever Positions Automatic Transmission.
To use the horn, press the center pad of the steering wheel. A, 395 kg for Canada. Do not try to tighten the wheel nuts fully. It has a lockout so you cannot shift directly from fifth to reverse. Serious engine damage is possible, and you should take immediate action. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service.
To open a window, push the switch down and hold it. Turn the dial counterclockwise to decrease it. The following explains these gradings. It gives you information about how to safely evaluate the problem and what to do to correct it. However, the indicator will not come on. Slide your hand to the left until you feel the hood latch handle. Based on the engine operating conditions and accumulated engine revolutions, the onboard computer in your vehicle calculates the remaining.
Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments. The child seat should fit the vehicle seating position or positions where it will be used. To lower the restraint, push the release button sideways, and push the restraint down. Adjust the steering wheel only when the vehicle is stopped. Before you make any modifications or add any accessories, be sure to read the following information.